MiningCrate Basics - GPU RISER KIT: PCI-E Express 1x to 16x Powered USB 3.0 GPU Riser Extender Adapter Card
1x PCI-E 16X adapter
1x PCI-E 1X riser board
1x USB3.0 cable
1x 15Pin-6Pin Power cable
1. Model: PCE164P-N03 VER006C
2. Brand new and high quality
3. Safer, more efficient, more practical
4. 6PIN adapter 12V DC-DC to strengthen the power supply, the graphics card power supply independent from the motherboard, which to reduce the burden on the motherboard when connect multi-graphics card
5.Graphics card power supply with four solid capacitors, graphics card power supply more stable and secure.
6. Solve the problem that welding point fragile burn, transmission signal attenuation, platoon line length is not enough and so on
7. Slots with fixed card buckle, remove the graphics card and the fixed graphics, the graphics card will not fall off from the slot
8. PCI-E connector with multi-layer shielded wire, the longest can connect 3 Meters the signal will not attenuate
1.Power Connector: 6 pin power cable
2.The board size：12.7cm*4.2cm
3.USB Cable Length:60cm
4.Compatible use: with any graphics cards
1. This extension is applicable to the mainboard PCI - E slot (1 x 2 x, 4 x 8 x 16 x). Please plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.
2. The form a complete set of wire rod is customized, never grab line to plug in. Remember that!
3. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
4. Dual-core graphics Suggestions with the old line, the mainboard is 16 x also recommends using the old row line!
We Also Recommend
Next Generation Bitcoin ASIC By Cheetah Miner F5 V2 F5m - Stable 53TH/s using SAMSUNG 10nm ASIC Chipset
BlackMiner F1+ "REPROGRAMABLE ASIC" Mines ANYTHING like Gpus 6 FPGA per board 3 boards LIKE 18 GPUS in a single tube asic shell and STABLEWorlds BEST FPGA MINER - Bitmain APW3++ PSU Included - Ships from USA
Antminer S15 pro - 35TH/s at 1950 watt - Bitmains New 7nm Next Generation chipset! Bitcoin ASIC Miner Bitcoin - advanced PER CHIP tuning - Efficiency mode 22TH/s at 980w
Antminer S19 - Tuned STABLE 120TH/s at 4500 watts - AIR COOLED 120TH/s PLUG AND PLAY Ready